FAQs

MULTIPURPOSE SYSTEM ("TASS - MPS") FOR

  • WATER PROOFING
  • ANTI CORROSION
  • CONCRETE REPAIRS & MORE
  • WALL CARE
  • HEAT INSULATION
  • CRACK FILLING / SEALING
  • CEMENT PAINT ADDITIVE

ALL PROBLEMS SOLVED BY "TASS MPS"

01. What is “TASS-MPS”?
“TASS-MPS” is a two part system using world-wide accepted special chemical, based on acrylic emulsion alongwith an appropriate filler to solve the multiple construction problems like WATERPROOFING, CORROSION CONTROL, WALL CARE, HEAT INSULATION, CRACK-FILLING, ADDITIVE, CONCRETE/PLASTER REPARING ETC.

Leakages occurs mainly

Due to honey combing in concrete, Due to high temperature variation & Heavy rain fall

“TASS-MPS” attacks on all above reasons. “TASS-MPS” penetrates in porous & seals, forms complete waterproof barrier on the surface & reflects the heat & minimizes the temp.variation.
YES. “TASS-MPS” seals the honey combing & coating absorbs less heat thus minimizes temp.variation & works effectively.
YES it’s true.
Part A (liquid) coating applied on steel which controls corrosion.
Life of steel & building increases.
YES. “TASS-MPS” coating requires wet surface. It also requires less curing time. So one can use during monsoon.
NO. Being the flexible material of “TASS-MPS” cracks will not open again. Acrylic part of “TASS-MPS” holds between new and old mortar/concrete very effectively.
NO. “TASS-MPS” has a great flexibility & also reflects the heat. Not effected by U.V. rays. Further, coating becomes a part & parcel of the surface. This is the reason “TASS-MPS” works in INDIAN tropical weather condition.
Moisture penetrates inside the wall comes out & damage the painted walls.
“TASS-MPS” coating protects this moisture to come out. Paint coated over “TASS-MPS” gives excellent life.
YES. “TASS-MPS” definitely economical & beneficial as well. “TASS-MPS” coating :

  • Seals the porous & increase life.
  • Due to less heat absorption reduces the use of cooling appliances.
  • Increases the life of coastly paints.
  • Protects corrosion.
  • Cost wise also very very economical.
Workmanship is very important. Application is easy but accuracy has great importance. Read instruction carefully & apply accordingly. YES, you can do it.
Take two smooth polished stone like marble or kota stone. Put some drops of “TASS-MPS” part A on one surface. After 2 minutes put another stone over it. Let it dry for 3-4 hours. Now try to separate those stones. You will find the strength of the material.
Take two bricks. Apply one brick with “TASS-MPS” & leave for 6-8 hours. Now soak both pieces of bricks into water. Take them out and measure the weight of both the pieces. (untreated & “TASS-MPS” treated )